3. Transaction Codesadd chapter
The BCS-2 application can be “remotely controlled” via a scanpad or via the keyboard on the computer if you store the appropriate transaction codes that trigger the commands.
- With CONTROL-N-XXXX codes by using keyboard (scanpad)
Here’s a list of all comands:
| Transaction | Shortcut | Description | Comment |
| General | |||
| 0002 | Save job as | ||
| 0005 | Send job to | ||
| 0032 | Close application | ||
| 1005 | Close job and create new job | ||
| 1007 | Transfer and leave job | ||
| 1022 | Transfer job and stay | ||
| 0172 | Call help | ||
| 1234 | General: Resetting the window geometry and toolbar positions, the program is automatically closed and must be restarted | ||
| 9150 | Save current toolbar layout | ||
| 1260 | Print job: Switch on format A4 permanently | ||
| 1261 | Print job: Switch on format A3 permanently | ||
| 1262 | Print job: Permanently switch on color printing | ||
| 1263 | Print job: Permanently switch on black and white print | ||
| 1264 | Print job: Turn on orientation landscape permanently | ||
| 1265 | Print job: Turn on orientation portrait fixed | ||
| 1266 | Print job: Permamently switch to Duplex mode | ||
| 1267 | Print job: Permamently switch to Simplex mode | ||
| View | |||
| 0022 | View: Original size | ||
| 0025 | View: Fit to window | ||
| 0027 | Zoom in | ||
| 0028 | Zoom out | ||
| Image Editing | |||
| 0013 | UNDO | ||
| 0099 | Delete current page (Without further enquiry!) | Without further enquiry! | |
| 0133 | Rotate image 90° (clockwise) | ||
| 0134 | Rotate image 90° (counterclockwise) | ||
| 0135 | Rotate image by 180° | ||
| 0139 | Despeckle | ||
| 0140 | Straighten image | ||
| 0156 | Rotate image by -1° | ||
| 0157 | Rotate image by 1° | ||
| 5118 | white inside | ||
| 5119 | white outside | ||
| 5110 | Increase brightness – subsequently increase the brightness of the image | ||
| 5111 | Reduce brightness – subsequently reduce the brightness of the image | ||
| 5112 | Increase contrast – subsequently increase the contrast of the image | ||
| 5113 | Reduce contrast – subsequently reduce the contrast of the image | ||
| 9022 | Extract single page (ImagePlus) | ||
| Navigation | |||
| 1256 | Navigation: First page | ||
| 1257 | Navigation: Previous page | ||
| 1258 | Navigation: Next page | ||
| 1259 | Navigation: Last page | ||
| Masks, Areas and Split Lines | |||
| 0147 | Perform action | ||
| 0151 | Toggle split line | ||
| 0360 | Turn on mask | ||
| 0361 | Turn on mask with split line | ||
| 0362 | Toggle mask with gutter | ||
| 0363 | Turn on mask with overlapping gutter | ||
| 0364 | Turn off masking | ||
| Tx2019 | C | Clone selected area to the right | |
| Tx2020 | SHIFT-C | Clone selected area to the left | |
| Tx2021 | Clone selected area up | ||
| Tx2022 | Clone selected area down | ||
| Language | |||
| 0600 | Language: German | ||
| 0601 | Language: English | ||
| 0602 | Language: French | ||
| OCR | |||
| 0800 | OCR: Perform for Current Page | ||
| 0801 | OCR: Perform for Current Zone | ||
| 0803 | OCR: Create eL XML OCR texts for the current page | ||
| 0804 | OCR: Display the eL XML OCR text of the current page | ||
| Job and Page Indexes | |||
| 2000 | Shift-F11 | Edit job indices | |
| 2001 | F11 | Show job indexes | |
| 2002 | Shift-F12 | Edit page indexes | |
| 2003 | F12 | Show page indexes | |
| 2004 | IndexSuite: Display the structure indices of the current node in the tree | ||
| 2005 | Space | IndexSuite: Editing the structure indices of the current node in the tree | |
| Indexierung | |||
| 9704 | CTRL+I | IndexSuite: Move inside the tree: Insert a new level above the current node | |
| 9705 | CTRL+Delete | IndexSuite: Move inside the tree: DELETE node after enquiry | |
| 9706 | CTRL+← | IndexSuite: Move inside the tree: Promote the current node in the hierarchy | |
| 9707 | CTRL+→ | IndexSuite: Move inside the tree: Demote the current node in the hierarchy | |
| 9708 | Control-↑ | IndexSuite: Move inside the tree: Move current node to the left at the same level | |
| 9709 | Control-↓ | IndexSuite: Move inside the tree: Move current node to the left at the same level (Short-Cut: CTRL +Down) | |
| 9710 | ← | IndexSuite: Moving in the tree: Go to the next higher neighbor | |
| 9711 | → | IndexSuite: Moving in the tree: Go to the next lower neighbor | |
| 9712 | ↑ | IndexSuite: Moving in the tree: Go to the next lower neighbor | |
| 9713 | ↓ | IndexSuite: Moving in the tree: Go to the right neighbor | |
| 9714 | CTRL+Keypad Plus | IndexSuite: Moving in the tree: Unfold all | |
| 9715 | CTRL+Keypad Minus | IndexSuite: Moving in the tree: Collapse all | |
| 9716 | CTRL+Shift-← | IndexSuite: Moving in the tree: Move current node to previous chapter and back to successor | |
| 9717 | IndexSuite: Pagination: Open dialog with pagination settings for the current node | ||
| 9718 | IndexSuite: Pagination: Re-run pagination for the entire job | ||
| 9719 | IndexSuite: Pagination: Reset pagination for the entire job, all settings per node are set to default | ||
| 9720 | IndexSuite: Pagination: Toggle automatic pagination after scanning, deleting, moving | ||
| 9723 | CTRL+Shift-I | IndexSuite: Insert a new structure node for the current page | |
| Scanner Settings | |||
| 0041 | Scan page (start job, walkup: start process) | ||
| 0044 | Scanner : Bitonal | ||
| 0046 | Scanner : Grayscale | ||
| 0047 | Scanner : Colour | ||
| 0048 | Scanner : Toggle: Invert automatically after the scan | ||
| 0049 | Scanner : Toggle: Automatically deskew after scan | ||
| 0050 | Scanner : Toggle: Despeckle automatically after scan | ||
| 0051 | Scanner : Toggle: Run Image-Plus automatically after the scan | ||
| 1230 | Scanner: Bitonal, photo mode | ||
| 0123 | Scanner : Toggle: Mirror on vertical axis after scan | ||
| 0130 | Scanner :Toggle: Automatically rotate 90° after the scan | ||
| 0131 | Scanner : Toggle: Automatically rotate 180° after the scan | ||
| 0132 | Scanner : Toggle: Automatically rotate 270° after the scan | ||
| 3000 | Recognize barcodes on the current page as a test | ||
| 5001 | Scanner: Set maximum format | ||
| 5002 | Scanner: Set format A1 | ||
| 5003 | Scanner: Set format A2 | ||
| 5004 | Scanner: Set format A3 | ||
| 5005 | Scanner: Set format A1 | ||
| 5006 | Scanner: Set format A5 | ||
| 5012 | Scanner: Set format B1 | ||
| 5013 | Scanner: Set format B2 | ||
| 5014 | Scanner: Set format B3 | ||
| 5015 | Scanner: Set format B4 | ||
| 5016 | Scanner: Set format B5 | ||
| 5026 | Bookeye: Docsize “Auto” | ||
| 5042 | Bookeye: Docsize “Maximum” | ||
| 5057 | Bookeye: Docsize “Crop_Deskew” | ||
| 5026 | Bookeye: Docsize “Auto” | ||
| Bookeye DOC Modes | |||
| 0270 | Bookeye4: “Glossy-Modus” On (Anti-Reflection) | ||
| 0271 | Bookeye4: “Glossy-Modus” Off (Anti-Reflection) | ||
| 0272 | Bookeye4: Scan-Quality FAST | ||
| Bookeye Scanner Settings | |||
| 5114 | Increase brightness on scanner by 10% | ||
| 5115 | Decrease the brightness on the scanner by 10% | ||
| 5116 | Increase the contrast on the scanner by 10% | ||
| 5117 | Decrease the contrast on the scanner by 10% | ||
| 5120 | Bookeye: docmmode 0 flat | ||
| 5121 | Bookeye: docmmode 1 book | ||
| 5122 | Bookeye: docmmode 2 folder | ||
| 5123 | Bookeye: docmmode 3 fixed | ||
| 5124 | Bookeye: docmmode 4 glassplate | ||
| 5125 | Bookeye: docmmode 5 auto | ||
| 5126 | Bookeye: docmmode 6 V mode fixed | ||
| 5160 | Daumenentfernung AN | ||
| 5161 | Daumenentfernung AUS | ||
| 5170 | Bookeye: Automatic page split OFF | ||
| 5171 | Bookeye: Automatic page split LEFT | ||
| 5172 | Bookeye: Automatic page split RIGHT | ||
| 5173 | Bookeye: Automatic page split LEFT AUTOMATIC | ||
| 5174 | Bookeye: If page split is AUTOMATIC, left page first | ||
| 5175 | Bookeye: If page split is AUTOMATIC, right page first | ||
| 5203 | 150 DPI | ||
| 5204 | 200 DPI | ||
| 5206 | 300 DPI | ||
| 5207 | 400 DPI | ||
| 5300 | Scanner : Scan2Net Scanner: Set file format TIFF | ||
| 5301 | Scanner : Scan2Net Scanner: Set file format JPEG | ||
| 5400 | Scanner : List of operations to be performed after the scan CLEAR | ||
| 9100 | shutdown scanner | ||
| 9101 | reboot scanner | ||